  |
|
American Audio DLS-15
 |
- 15" 2-way speaker
- Die-cast woofer with 3" voice coil
- Compression 1.75" HF driver
- 300W RMS power handling
- ABS nylon fiber cabinet
- Trapezoidal design
- Flyable and stand mountable
- Floor monitor brackets
- 120V/220V switchable
- Sensitivity: 109 dB/m/w
- 300W power handling
- Dimensions: 16-1/2"W x 26-1/2"H x 13-1/2"D
- Weight: 56 lbs.
|
|
- High Powered 15-inch, 2-way speaker
- Die cast woofer with 3-inch voice coil
- High compression 1.75" driver
- Built-in high-powered amplifier system
- ABS nylon fiber cabinet with handle
- XLR & RCA line inputs
- Two microphone inputs (XLR & 1/4" stereo) with separate microphone volume control
- Treble, bass and volume output control
- Trapezoidal design
- Flyable & stand mountable
- Floor monitor brackets included
- 120V/220V switchable
- Sensitivity: 109 dB/m/w
- Dimensions (LxWxH): 13.6" x 16.5" x 26.4 / 345 x 419 x 671 mm
- Weight: 61 lbs. / 28 kgs.
- DLS-15P fits into optional APX-B Speaker Transport Bag
|
|
American Audio DLS-15P
|
American Audio PXW 15P
|
- 15" Powered subwoofer
- Attached wheels
- Limit Indicator lets you know when built-in limiter is active
- Signal Indicator glows when when there a signal is received to the Full Range input
- Subwoofer gain control knob regulates the output level of the sub-
- woofer and sets balance between the speakers and subwoofers
- Protect Indicator glows when the subwoofer goes into protect mode which prevents the subwoofer amplifiers from getting too hot and stops all output
- Power LED indicates power is on
- Phase switch for reversing polarity of subwoofer
- Full range XLR input
- High Pass XLR output
- Thru full range output
- Built-in pole mount socket
- Built-in carrying handles
|
|
- High-power 400-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact lightweight system delivers excellent sound even at extreme sound pressure levels
- Integrated sound processor for ultimate system control and speaker protection
- Extremely powerful 12 in. long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.25 in. titanium-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential/conical horn
- Ultra-low noise Mic/Line input (XLR and 1/4 in. TRS) with Volume control and Clip LED
- Dedicated 2-band EQ for perfect sound adjustment
- Additional Line output (XLR) allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning:
-- Stand mounting with 35-mm pole socket
-- Tilts on its side for use as a floor monitor
- Ergonomically shaped handles for easy carrying and setup
- High-quality components and exceptionally rugged construction ensure long life
|
|
Behringer 212A
|
Behringer TRUTH B2030A Active Monitors
|
- 12-1/2" x 8-2/5" x 8-1/3"
- 22 lbs.
- 2-way reference studio monitor
- Perfect for near field and multichannel surround setups
- Over 113dB SPL
- 75W and 35W amplifiers with an active crossover
- 50Hz-21kHz frequency response
- Long-throw 6.75" woofer
- High-resolution HF driver
- Behringer wave guide and crossover delivers extremely low-distortion, absolutely linear phase response with excellent sound dispersion and stereo imaging
- XLR and 1/4" TRS connectors
- Magnetic shielding
|
|
Frequency Response |
30 Hz – 300 Hz |
Power Capacity |
800 w continuous (RMS) / 1600 w Peak |
Recommended Amplifier Power |
1200 w – 1600 w @ 8 ohms |
Input Connectors |
¼” Phono, Speakon |
Sensitivity (1 w /1 m) |
108 dB |
Nominal Impedance |
8 ohms |
Maximum SPL |
140 dB |
Dimensions (H x W x D) |
36” x 24” x 36”
91.4 cm x 61 cm x 91.4 cm |
Weight |
156.3 lbs / 70.9 kg |
|
|
|
 |
-
- Built-in system amplification optimized for the 18-inch woofer
- Master/ Slave Outputallows for daisy-chaining multiple subs reduces cable connections
- Rugged Hardwood Enclosure with Paint or Carpet Finish
- Top-mount industry standard 35mm Pole Socket accomodates single or multiple CVA-28s using the CVA accessories.
|
|
Frequency Response |
30 Hz – 300 Hz |
Power Capacity |
500 w continuous (RMS) / 1000 w Peak |
Recommended Amplifier Power |
750 w – 1000 w @ 8 ohms |
Input Connectors |
¼” Phono, Speakon |
Sensitivity (1 w /1 m) |
106 dB |
Nominal Impedance |
8 ohms |
Maximum SPL |
138 dB |
Dimensions (H x W x D) |
36” x 24” x 36”
91.4 cm x 61 cm x 91.4 cm |
Weight |
159.3 lbs / 72.2 kg |
|
|
 |
|
| • |
Frequency Response: 50 Hz - 20 kHz |
|
| • |
Peak Power Handling: 600 watts |
|
| • |
Program Power Handling: 300 watts |
|
| • |
Nominal Impedance: 8 Ohms |
|
| • |
Sensitivity (1w/1m): 98 dB |
|
| • |
Low Frequency: 15" Woofers with 2.5" Voice Coil |
|
| • |
High Frequency: 34mm Titanium Compression Driver with Exclusive Cerwin-Vega! HighRoad Horn |
|
| |
|
|
| DIMENSIONS |
|
| |
Dimensions (HxWxD): 30 " x 18 " x 19 "
|
|
| |
Weight: 62 lbs. |
|
|
Frequency Response |
35 Hz – 300 Hz |
Power Capacity |
500 w continuous (RMS) / 1000 w Peak |
Recommended Amplifier Power |
750 w – 1000 w @ 8 ohms |
Input Connectors |
¼” Phono, Speakon |
Sensitivity (1 w /1 m) |
106 dB |
Nominal Impedance |
8 ohms |
Maximum SPL |
136 dB |
Dimensions (H x W x D) |
36” x 24” x 24”
91.4 cm x 61 cm x 61 cm |
Weight |
121 lbs / 54.9 kg |
|
|
 |
 |
|
Frequency Response: 45 Hz - 20 kHz |
|
| • |
Peak Power Handling: 1000 watts |
|
| • |
Program Power Handling: 500 watts |
|
| • |
Nominal Impedance: 4 Ohms |
|
| • |
Sensitivity (1w/1m): 100 dB |
|
| • |
Connections: 2 x 1/4" Phone, 2 x Neutrik Speakon |
|
| • |
Low Frequency: Dual 15" Woofers with 2.5" Voice Coil |
|
| • |
High Frequency: 34mm Titanium Compression Driver with Exclusive Cerwin-Vega! HighRoad Horn |
|
| |
|
|
| DIMENSIONS |
|
| |
Dimensions (HxWxD): 46 " x 18 " x 19 "
|
|
| |
Weight: 87 lbs. |
|
|
|
|
|
|
|
|
|
 |
| |
 |
| Model |
Woofer |
Tweeter
(diaphragm) |
Freq
Resp
(-10dB) |
Power
Handling
(noise1/
program/peak) |
Sen-
sitivity |
Max.
SPL3 |
Dims.
(WxHxD) 2 |
Wt.2
(lbs) |
| S SERIES Road-worthy, rugged carpet covered models |
| S112V |
12" |
2" titanium |
60Hz-
16kHz |
175/350/700 |
97dB |
126dB |
17x25x13 |
42.5 |
| S115V |
15" |
2" titanium |
55Hz-
16kHz |
250/500/1000 |
99dB |
129dB |
19x28x15 |
60.5 |
| S215V |
15" (2) |
2" titanium |
42Hz-
16kHz |
500/1000/2000 |
99dB |
132dB |
20x46x24 |
101.0 |
| SM10V |
10" |
1" phenolic |
70Hz-
20kHz |
125/250/500 |
96dB |
123dB |
22x14x11 |
27.0 |
| SM12V |
12" |
2" titanium |
60Hz-
16kHz |
175/350/700 |
97dB |
126dB |
25x16x14 |
43.0 |
| SM15V |
15" |
2" titanium |
55Hz-
16kHz |
250/500/1000 |
99dB |
129dB |
28x19x14 |
57.0 |
| SW115V |
15" |
n/a |
35Hz-
2kHz |
250/500/1000 |
95dB |
125dB |
20x24x21 |
64.0 |
| SW118V |
18" |
n/a |
30Hz-
2kHz |
300/600/1200 |
96dB |
127dB |
24x29x25 |
71.0 |
| SW218V |
18" (2) |
n/a |
30Hz-
2kHz |
600/1220/2400 |
98dB |
132dB |
48x23x26 |
132.0 |
|
| C Series V |
Club V loudspeakers with the C prefix are coated with a heavy-duty elastomeric spray coating. Designed as an installation alternative to the carpeted S versions, they can easily fit any décor. The finish is very tough, and readily paintable to match surroundings. The steel grilles are foam-lined with acoustically transparent material to provide a more subdued appearance. |
|
| |
|
 |
|
400-WATT
POWERED SPEAKER
800-WATT
POWERED SUBWOOFER |
| |
|
|
| Great PA Sound Has Never Been Easier Or Better Looking |
Much of the work in putting together a high-performance sound system involves amplifier and speaker selection and setup. Here are a pair of solutions that can take you directly to great sound without the usual complications. The MSR400 powered speaker can be used alone or in combination with the MSR800W powered subwoofer to assemble sound reinforcement systems from modest to massive. They look great, too. So good, in fact, that they can be used as-is in many permanent installations without requiring any cosmetic cover-up. And, of course, theyre more than rugged enough for demanding tour applications as well. |
| The Case For Built-in Power |
Whether for use on the road or in permanent installations, powered speakers offer numerous advantages over their separate counterparts. The most obvious is that you dont need separate external amplifiers or the extra connections required you can plug your mixers outputs directly into the speaker inputs. In a modest-size system this alone can eliminate an entire rack of amplifiers. But there are sonic advantages as well. Optimum matching of amplifiers and speakers involves much more than simple impedance figures, and can be a formidable engineering task given the vast number of choices available. In the Yamaha MSR400 and MSR800W the internal amplifiers have been ideally mated to their respective speakers in every way possible, delivering reproduction quality that only such stringent matching can achieve. |
| SYSTEM EXAMPLE |
|
In this system, the main house speakers are a pair of MSR400s with speaker stands and MSR800W subwoofer, driven directly from the mixers main stereo and mono outputs. The MSR400s feature punchy bass and exceptionally clear midrange that delivers vocals with outstanding quality. The MSR800W subwoofer takes care of the ultra-lows so the audience hears – and feels – the full impact of the music. A second pair of MSR400s is used for stage monitoring, connected via a graphic equalizer for feedback control. |
| Bi-Amplification |
The MSR400 is a bi-amplified 2-way system, featuring 400 watts maximum burst power that drives the 12" cone woofer and 1.75" V.C. compression driver. Frequency division is accomplished prior to the power amplifiers via a line-level electronic crossover. This eliminates the problems with loss, distortion, and phase that are virtually unavoidable in conventional passive crossover networks. Another advantage of this type of system is that power can be optimally assigned to the low-frequency and high-frequency units for optimum efficiency as well as smooth, natural balance across the entire audio spectrum. |
| Wide Input Range & EQ Control |
|
The MSR400 accepts nominal input levels ranging from 36 dB to +4 dB, meaning that you can directly connect any source from microphones to professional line-level gear. Three parallel-connected connectors are provided two balanced XLR-type connectors and one balanced phone jack that can be used as either inputs or parallel outputs. The MSR400 also features an input level control for matching with the source signal. Low and high EQ controls can be used to adjust the respective bands over a plus-or-minus 3dB range. |
| Versatile Placement |
|
Speaker placement is as much a performance issue as it is a convenience and aesthetic issue. Proper placement will give you optimum sound as well as coverage while being as unobtrusive as possible. Of course, the more options you have the better. The MSR400 can be stacked or pole-mounted (theres even a pole-mount hole provided on the companion MSR800W Powered Woofer). And its flyable so you can benefit from the unrivalled coverage and positioning precision that only ceiling suspension can provide. |
M S R 8 0 0 W
|
| For Sound You Can Feel |
|
The MSR800W powered subwoofer is the perfect companion for the MSR400, extending the low end and completing the musical spectrum for maximum punch and impact. The high-quality birch plywood bass-reflex cabinet houses a 15 cone woofer powered by an ultra-efficient burst 800 watts amplifier, a configuration that can deliver the elusive 40 Hz through 120 Hz frequency range with precision and authority. Two balanced XLR connectors are provided for connection to the source, and that same signal can be directly passed on to the main speakers via a pair of XLR THRU outputs. Alternatively, the main speakers can be fed by the MSR800Ws dual HIGH PASS outputs, high-pass filtered at 80 Hz through100 Hz, depending on the setting of the cutoff frequency control, with a steep 18 dB/octave cutoff slope. |
| Visual Clip Indication |
Both the MSR400 and MSR800W feature LED power indicators as well as clip indicators that warn of impending clipping. This allows the engineer to make appropriate adjustments to the source level. |
| M S R 100 |
 |
|
|
| |
|
 |
|
Powered Speaker |
| |
|
|
|
|
| All-in-one sound solution – powerful, versatile, reliable |
Compact in size but big in sound and versatile features, the MSR100 packs a powerful sonic punch – making it ideal for a wide range of applications and almost anywhere in your stage setup.
|
| All-around performer |
The MSR100 fills many sound reinforcement and stage monitor needs in one inexpensive, lightweight package. As a mixer, power amplifier, and speaker system combined in a single, compact unit, it's perfect for small events and club gigs. Mix in a CD player, rhythm machine and/or keyboard with your voice – all without the need of a separate mixer or power amplifier. And since it's made by Yamaha, the MSR100 provides the high-quality performance you need with exceptional ease-of-use and reliability.
|
| High power, great sound |
The 100-watt power amplifier built into the MSR100 delivers plenty of output, ensuring that you'll be heard with full dynamic range and clarity. This specially designed amplifier has been optimized for use with the speaker section of the MSR100 to give you the absolute clearest and cleanest sound possible.
An 8" custom woofer handles the low end, while a 1" pure titanium diaphragm compression driver delivers the high frequencies. The horn of the MSR100 provides a wide 90° x 40° sound dispersion for optimum audience coverage.
|
| Versatile mixer and connections |
A simple but effective mixer built into the rear of each unit provides 3 inputs with master EQ for precise sound control. The input 1 XLR connector accommodates almost any microphone or line input (with a -50dB/+4dB pad switch), while line sources can be connected by phone jack to the input 2 and input 3 connectors. This makes the MSR100 perfect for small events and club gigs.
Naturally, each input has its own level control, with a Master Level control for overall output. Two-band EQ – high and low – gives you further control over the final sound. A convenient CLIP indicator alerts you when the input signal is too high, letting you avoid distortion. For larger events, the MSR100's special LINK OUT jack can be used to connect multiple units and expand your sound coverage.
|
| Flexible placement options |
The MSR100 is compact, lightweight, and ready to go anywhere you go. Besides a built-in handle, its distinctive design lets you stand the unit upright for conventional sound reinforcement, or lay it on its angled side for use as a floor monitor.
The MSR100 is as rugged as it is versatile, with a durable polypropylene enclosure that stands up to the rigors of the road. A variety of mounting options also let you place it on a pole, suspend it from the ceiling, attach it to a wall, or even safely stack multiple units on the floor. |
|
|
|
|
|
| |
